Selection guide · Format

In-line or batch?

In-line systems take strips straight from the line; chambers treat trays and fixtures in batches. Start from how your parts arrive.

AW-ZP in-line RF plasma cleaner — AW-ZP · in-line · H 1950 mm

AW-P chamber RF plasma cleaner — AW-P100 · chamber · H 1950 mm

Decision guide

How do your parts arrive?

Lead-frame strips on a packaging lineHands-off loading — same-side or left-in / right-out — with an optional MES link.

AW-ZP · AW-ZMPIn-lineSee the systems

Parts on carrier trays between two toolsThe cleaner links to the equipment before and after it.

AW-LPContinuousSee the systems

Mixed parts, fixtures or larger piecesBatches on multi-layer electrodes or a rotating tray, with stored recipes.

AW-P · AW-MPBatch chamberSee the systems

R&D line, laboratory or small batchesCompact chambers and benchtop units.

AW-P00X · AW-DPR&D and desktopSee the systems

Single wafers, 4 to 8 inchPhotoresist strip and descum before etching.

AW-QPSingle-waferSee the systems

In-line strip cleaner or batch chamber.

	AW-ZPin-line RF	AW-Pchamber RF
Work format	Lead-frame strips, 4 lanes	Batches on trays and fixtures
Loading	Automatic pick, transfer and delivery; same-side or left-in / right-out	Batch loading; optional automatic door for later automation
Work size	Strips L 150–300 × W 30–100 mm (ZP04B), L 105–155 × W 30–80 mm (ZP04A)	Chamber L 500 × W 500 × H 400 mm (P100), L 540 × W 530 × H 600 mm (P170)
Throughput	UPH > 500 (ZP04B) · ~800 (ZP04A)	Set by batch size and recipe
Plasma source	13.56 MHz · 0–600 W / 1000 W	13.56 MHz · 0–600 W / 1000 W
Control	Touchscreen + PLC; tiered parameter access; optional MES link	Touchscreen + PLC; stored recipes; optional MES link
Footprint	L 1700 × W 1100 × H 1950 mm	L 1000 × W 950 × H 1950 mm (P100)

Figures from Awing product literature

Format, briefly.

Q01When is a batch chamber the better choice?

When parts arrive on trays or fixtures, vary in shape, or are too large for a strip transfer — and when a line does not need hands-off loading. Chambers store multiple recipes and adjust electrode spacing to the workpiece.

Q02Can the system handle my part size and takt time?

Compare your part with the strip and chamber sizes on each product page, then send us the dimensions and your target UPH. We confirm the fit before quoting. Quotation inquiry

Q03Can it connect to our line and MES?

In-line and continuous systems load same-side or left-in / right-out and connect to the equipment before and after them; touchscreen + PLC control takes an optional industrial PC for MES connection. Configurations can be designed to customer requirements.

In-line or batch? Ask us.

Tell us how parts arrive, the throughput you need and how the line runs. We recommend the format.

Start an inquiry awingtech@wxawing.com +86 510 8359 5266